LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1891 (Rear Suspension -- F250-F550 Super Duty) >> Removal And Installation >> Wheel Studs - Single Rear Wheel >> Removal

Wheel Studs - Single Rear Wheel: Removal

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear wheel hub assembly. For additional information, refer to WHEEL HUBS AND BEARINGS - FULL FLOATING AXLE - DANA article.
  2. Using the special tool, remove and discard the wheel stud.
    Fig 1: Removing Wheel Studs Using Special Tool
    GF0006183Courtesy of FORD MOTOR CO.