Vehicles with circular flange

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Align the index marks.

NOTE: Bolt direction is vehicle application dependent.

Fig 1: Locating Driveshaft Flange Bolts

Courtesy of FORD MOTOR CO.

Position the driveshaft flange and loosely install 4 new bolts.
- Tighten to 111 Nm (82 lb-ft).

Install the 4 new bolts.
- For automatic transmissions, tighten to 103 Nm (76 lb-ft).
- For manual transmissions, tighten to 111 Nm (82 lb-ft).