LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1890 (Driveshaft -- F250-F550 Super Duty) >> Disassembly And Assembly >> Driveshaft Universal Joint - Rear Slip Yoke >> Disassembly >> Final disassembly

Final disassembly

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Repeat Bearing cup removal in this procedure to remove the remaining bearing cups and the spider from the shaft.
    2. Fig 1: Removing Bearing Cups And U-Joint Spider
    GF0000801Courtesy of FORD MOTOR CO.
  2. Clean the yoke area at the end of the shaft.
scientia non olet · About LEMON Manuals