LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1889 (Driveline System - General Information -- F250-F550 Super Duty) >> Diagnostic Tests >> Driveline System >> Inspection and Verification >> Knock

Inspection and Verification: Knock

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Knock, which can occur on all driving phases, has several causes including damaged teeth or gearset.

Fig 1: Identifying Knock
GF0000779Courtesy of FORD MOTOR CO.

A gear tooth damaged on the drive side is a common cause of the knock. This can usually be corrected by grinding the damaged area.

Fig 2: Identifying Gear Tooth For Damage
GF0000780Courtesy of FORD MOTOR CO.