LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1883 (Front Disc Brake System - F250-F550 Super Duty) >> Removal And Installation >> Front Disc Brake >> Installation >> All vehicles

All vehicles

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean any rust or foreign material from the brake disc and wheel hub.
    • Use brake parts cleaner to clean the front brake disc and hub surfaces.
  2. Apply a thin coat of anti-seize lubricant to the hub flange.
  3. Align the marks on the disc and the hub and install the brake disc.


  1. Position the brake disc caliper anchor plate and install 2 new bolts.
    • On F-250, F-350, tighten to 225 Nm (166 lb-ft).
    • On F-450, F-550, tighten to 400 Nm (295 lb-ft).
scientia non olet · About LEMON Manuals