Flywheel Runout Check
WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Dial Indicator/Magnetic Base or equivalent | 100-D002 (D78P-4201-B) |
- Using the special tool, inspect the flywheel runout.
- If the pilot bearing is worn or damaged, install a new pilot bearing.
- Mount the special tool so that the indicator contact point rides on the clutch disc contact surface. Turn the flywheel.
- If the runout exceeds the maximum allowance, install a new flywheel.