LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1873 (Transfer Case - F-150 & Mark LT) >> Installation >> Transfer Case

Transfer Case

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new transfer case-to-transmission gasket.
    Fig 1: Installing Transfer Case
    GF0004179Courtesy of FORD MOTOR CO.
  2. Fill the transfer case. For additional information, refer to Transfer Case Draining and Filling  in this article. Refer to SPECIFICATIONS  in this article for the correct type and quantity of fluid.
  3. Tighten the transfer case-to-transmission bolts to 47 Nm (35 lb-ft) evenly in a star pattern.
scientia non olet · About LEMON Manuals