LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1869 (Parking Brake System & Actuation - F150 & Mark LT) >> Removal And Installation >> Parking Brake Shoes >> Removal

Parking Brake Shoes: Removal

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: One parking brake shoe kit contains the linings required for both the LH and RH side.
    NOTE: Make sure the parking brake control is fully released.
  1. Relieve the tension on the parking brake cable. For additional information, refer to Parking Brake Cable Tension Release  .
  2. Remove the rear brake disc. For additional information, refer to REAR DISC BRAKE article.
  3. Remove the brake shoe adjuster screw.
  4. Remove the brake shoe adjuster screw spring.
  5. Remove the 2 brake shoe hold-down springs and 2 pins.
  6. Remove the brake shoe retracting spring and the parking brake shoes.
scientia non olet · About LEMON Manuals