LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1859 (Clutch System - F-150) >> Removal And Installation >> Pilot Bearing >> Installation

Pilot Bearing: Installation

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The input shaft pilot bearing can only be installed with the seal facing the transmission. The input shaft pilot bearing is pregreased and does not require additional lubrication.
  1. Using the special tool, install a new input shaft pilot bearing.
Fig 1: Installing Input Shaft Pilot Bearing
GF0003839Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals