LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1859 (Clutch System - F-150) >> Removal And Installation >> Clutch Disc and Pressure Plate >> Removal

Clutch Disc and Pressure Plate: Removal

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission. For additional information, refer to MANUAL TRANSAXLE/TRANSMISSION article.
  2. If the original components are to be installed, index-mark the clutch pressure plate and the flywheel.
    3. Fig 1: Index-Marking Clutch Pressure Plate And Flywheel
    GF0003833Courtesy of FORD MOTOR CO.
  3. Remove the clutch pressure plate bolts, clutch pressure plate and the clutch disc.
scientia non olet · About LEMON Manuals