LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1855 (Engine Emission Control System - F-150 & Mark LT) >> Removal And Installation >> Positive Crankcase Ventilation (PCV) Valve - 4.6L (2V) >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the positive crankcase ventilation (PCV) tube quick connect coupling. For additional information, refer to FUEL SYSTEM - GENERAL INFORMATION article.
  2. Disconnect the PCV valve electrical connector.
  3. Rotate the PCV valve counterclockwise and remove the PCV valve.
    • Discard the PCV valve.
  4. To install, reverse the removal procedure.
    • Install a new PCV valve.
scientia non olet · About LEMON Manuals