LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1851 (Safety Belt System - F-150 & Mark LT) >> Removal And Installation >> Safety Belt Buckle - Front, Center >> Regular cab safety belt mini-buckle

Regular cab safety belt mini-buckle

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH seat side trim panel screw and trim panel.
  2. Remove the bolt and the safety belt mini-buckle.
    • To install, tighten to 55 Nm (41 lb-ft).
    • The anti-rotation tab must be correctly aligned for correct installation.
scientia non olet · About LEMON Manuals