LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1844 (Supplemental Inflatable Restraint System - F-150 & Mark LT) >> Removal And Installation >> Occupant Classification Sensor >> Notes

Occupant Classification Sensor: Notes

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0000049
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool
Fig 1: Identifying Occupant Classification Sensor
GF0002232Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Electrical connectors
2 - Belt tension sensor (BTS) electrical connector (part of 14A699 or 632A22)
3 - Seat cushion nut (4 required)
4 632A22 Occupant classification sensor (OCS) assembly
5 62900 Seat cushion trim cover