LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1841 (Climate Control - F-150 & Mark LT) >> Removal And Installation >> Clutch and Clutch Field Coil >> Removal

Clutch and Clutch Field Coil: Removal

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor. For additional information, refer to Air Conditioning (A/C) Compressor - 4.2L  or Air Conditioning (A/C) Compressor - 4.6L, 5.4L  in this article.
  2. Remove the A/C clutch disc and hub bolt.
    • Using the special tool, hold the A/C clutch disc and hub.
    • Remove the A/C clutch disc and hub bolt.
    3. Fig 1: Identifying A/C Clutch Disc And Hub Bolt
    GF0004394Courtesy of FORD MOTOR CO.
  3. Remove the A/C clutch disc and hub.
  4. Remove the A/C compressor pulley snap ring.
    5. CAUTION: Do not use air tools. Damage to the A/C clutch pulley or A/C compressor may result.
  5. Using the special tool, remove the A/C compressor pulley.
    • Install the special tool.
    • Remove the A/C compressor pulley.
    6. Fig 2: Identifying A/C Compressor Pulley
    GF0004395Courtesy of FORD MOTOR CO.
  6. Remove the A/C clutch field coil snap ring.
  7. Remove the A/C clutch field coil electrical connector screw.
  8. Remove the A/C clutch field coil.
scientia non olet · About LEMON Manuals