LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1841 (Climate Control - F-150 & Mark LT) >> Removal And Installation >> Climate Control Assembly >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center instrument panel finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
  2. Remove the 4 climate control assembly screws.
  3. Remove the climate control assembly.
  4. To install, reverse the removal procedure.