LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1837 (Instrument Panel And Console) >> Removal And Installation >> Instrument Panel Center Finish Panel >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disengage the instrument panel center finish panel from the instrument panel.
  2. Disconnect the electrical connectors.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals