LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1832 (Information And Entertainment Systems) >> Removal And Installation >> Audio Input Jack >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
  2. Remove the 2 screws and the instrument panel upper tray.
    • Disconnect the audio input jack electrical connector.
  3. Release the tabs and remove the audio input jack.
  4. To install, reverse the removal procedure.