LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1819 (Engine - 4.2L - F-150) >> In-Vehicle Servicing >> Oil Level Indicator and Tube >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolt and the oil level indicator and tube assembly.
    • To install, tighten to 10 N.m (89 lb-in).
  2. Remove and discard the O-ring seal.
    • To install, apply clean engine oil to the new O-ring seal.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals