LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1819 (Engine - 4.2L - F-150) >> In-Vehicle Servicing >> Engine Dynamic Balance Shaft >> Removal

Engine Dynamic Balance Shaft: Removal

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: It is not necessary to remove the timing chain tensioner.
  1. Remove the timing drive components. For additional information, refer to Timing Drive Components  in this article.
  2. Remove the engine dynamic balance shaft drive gear.
    Fig 1: Identifying Engine Dynamic Balance Shaft Drive Gear
    GF0002413Courtesy of FORD MOTOR CO.
  3. Remove the bolts and the engine dynamic balance shaft.
scientia non olet · About LEMON Manuals