LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1819 (Engine - 4.2L - F-150) >> In-Vehicle Servicing >> Crankshaft Pulley >> Removal

Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Remove the accessory drive belt. For additional information, refer to ACCESSORY DRIVE article.
  3. Remove the fan blade assembly. For additional information, refer to ENGINE COOLING article.
  4. Using the special tool to prevent the crankshaft rotation, remove the crankshaft pulley bolt and washer.
    Fig 1: Locating Crankshaft Pulley Bolt
    GF0002383Courtesy of FORD MOTOR CO.
  5. Using the special tools, remove the crankshaft pulley.
    Fig 2: Removing Crankshaft Pulley
    GF0002384Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals