LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1819 (Engine - 4.2L - F-150) >> In-Vehicle Servicing >> Crankshaft Front Seal >> Removal

Crankshaft Front Seal: Removal

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft pulley. For additional information, refer to Crankshaft Pulley  in this article.
  2. Using the special tool, remove the crankshaft front seal. Discard the crankshaft front seal.
    Fig 1: Removing Crankshaft Front Seal
    GF0002387Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals