LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1819 (Engine - 4.2L - F-150) >> In-Vehicle Servicing >> Camshaft >> Removal

In-Vehicle Servicing: Camshaft: Removal

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the valve tappets. For additional information, refer to Valve Tappet  in this article.
    2. NOTE: It is not necessary to remove the timing chain tensioner.
  2. Remove the timing drive components. For additional information, refer to Timing Drive Components  in this article.
  3. Remove the engine dynamic balance shaft drive gear.
  4. Remove the camshaft Woodruff key.
  5. Remove the bolts and the camshaft thrust plate.
  6. Remove the camshaft spacer.
  7. Remove the camshaft.
scientia non olet · About LEMON Manuals