LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1819 (Engine - 4.2L - F-150) >> Assembly >> Engine >> Vehicles equipped with a manual transmission

Vehicles equipped with a manual transmission

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Tighten the bolts evenly in a criss-cross pattern.
    Fig 1: Tightening Flywheel Bolts In Criss-Cross Pattern
    GF0002496Courtesy of FORD MOTOR CO.
  1. Position the flywheel and install the 6 bolts.
    • Tighten to 80 Nm (59 lb-ft).
    2. NOTE: Tighten the bolts evenly in a criss-cross pattern.
    NOTE: If reusing the clutch pressure plate and flywheel, make sure the marks made during disassembly line up.
    Fig 2: Locating Clutch Pressure Plate Bolts
    GF0002495Courtesy of FORD MOTOR CO.
  2. Position the clutch pressure plate and the clutch disc and install the 6 bolts.
    • Tighten to 25 Nm (18 lb-ft).
scientia non olet · About LEMON Manuals