LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1816 (Engine Cooling System - F-150 & Mark LT) >> Removal And Installation >> Cooling Fan - Blade, Clutch and Shroud >> Vehicles equipped with a 5.4L (3V) engine

Vehicles equipped with a 5.4L (3V) engine

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner intake pipe. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING article.
  2. Remove the bolts and the air cleaner intake pipe support bracket.
    • To install, tighten to 10 Nm (89 lb-in).
scientia non olet · About LEMON Manuals