LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1816 (Engine Cooling System - F-150 & Mark LT) >> Removal And Installation >> Coolant Pump - 4.2L >> Notes

Coolant Pump - 4.2L: Notes

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Material

Item Specification
Motorcraft Metal Surface Prep
ZC-31
-
Fig 1: Exploded View Of Coolant Pump - 4.2L (1 Of 2)
GF0002822Courtesy of FORD MOTOR CO.
Item Part Number Description
1 N806282 Coolant pump pulley bolt (4 required)
2 8509 Coolant pump pulley
3 W708650 Heater outlet tube assembly bolt
4 18663 Heater outlet tube assembly
5 - Heater outlet tube assembly O-ring seal
6 N808113 A/C compressor mounting bracket support bolts (2 required)
7 W710417 A/C compressor mounting bracket support nuts (2 required)
8 19D626 A/C compressor mounting bracket support
9 8287 Lower radiator hose clamp
10 8286 Lower radiator hose
Fig 2: Exploded View Of Coolant Pump - 4.2L (2 Of 2)
GF0002823Courtesy of FORD MOTOR CO.
Item Part Number Description
11 N605908 Coolant pump bolt (3 required)
12 N804758 Coolant pump nut (4 required)
13 N808217 Coolant pump bolt
14 N804852 Coolant pump stud bolt
15 8501 Coolant pump
16 8507 Coolant pump gasket