LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1812 (Starting System - F-150 & Mark LT) >> Specifications >> General Specifications

General Specifications

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS

Item Specification
Normal engine cranking speed 140-220 rpm
Starter motor maximum load 800 ampsa
Starter motor minimum stall torque (at 5 volts) 14.7 N.m (10.8 lb-ft)
Starter motor no load current draw 60-84 amps
Starter motor normal load current draw 130-220 ampsb
Starter motor maximum voltage drop (engine at normal operating temperature) 0.5 volts

a Initial "in-rush" current draw.

b Continuously running current draw.