LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1809 (Front Suspension - Four Wheel Drive (4WD) -- F-150 & Mark LT) >> Removal And Installation >> Ball Joint - Lower >> Removal

Ball Joint - Lower: Removal

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel knuckle. For additional information, refer to Wheel Knuckle  in this article.
  2. Remove and discard the lower ball joint snap ring.
  3. Using the special tools, remove the lower ball joint.
  4. Fig 1: Removing Lower Ball Joint
    GF0002990Courtesy of FORD MOTOR CO.