LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1807 (Automatic Transmission - 4R70E/4R75E - F150 & Mark LT) >> General Procedures >> Transmission Fluid Drain and Refill >> Draining, all vehicles using a suitable flush and fill machine

Draining, all vehicles using a suitable flush and fill machine

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Always refer to the instructions supplied with the flush and fill machine, or transmission damage may occur.
NOTE: Draining fluid from the transmission by removing only the transmission fluid pan is acceptable for normal or severe duty transmission fluid maintenance.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Use a suitable flush and fill machine to change the transmission fluid.
  3. When connecting the flush and fill machine, connect the machine to the transmission fluid cooler tube after the transmission fluid cooler on the transmission fluid cooler return tube. This will help remove any foreign material trapped in the transmission fluid coolers.
scientia non olet · About LEMON Manuals