Diagnosis by Symptom Chart Directions
WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Using the Diagnosis by Symptom Index, select the Concern/Symptom that best describes the condition.
- Refer to the routine indicated in the Diagnosis by Symptom Index.
- Always begin diagnosis of a symptom with:
- preliminary inspections.
- verifications of condition.
- checking the fluid levels.
- carrying out other test procedures as directed.
- Begin with the Electrical Routine, if indicated. Follow the reference or action required statements. Always carry out the on-board diagnostic tests as required. Never skip steps. Repair as required. If the concern is still present after electrical diagnosis, then proceed to the Hydraulic/Mechanical Routine listed.
- The Hydraulic/Mechanical Routines list possible hydraulic or mechanical components that could cause the concern. These components are listed in the removal sequence and by most probable cause. All components listed must be inspected to make sure of correct repair.DIAGNOSIS BY SYMPTOM INDEX
Title Routines Electricala Hydraulic/ Mechanical Engagement Concerns No Forward 201 301 No Reverse 202 302 Harsh Reverse 203 303 Harsh Forward 204 304 Delayed/Soft Reverse 205 305 Delayed/Soft Forward 206 306 Shift Concerns Some/All Shifts Missing 210 310 Timing Concerns - Early/Late 211 311 - Erratic/Hunting 212 312 Feel - Soft/Slipping 213 313 - Harsh 214 314 No 1st Gear, Engages in Higher Gear 215 315 No Manual 1st Gear 216 316 No Manual 2nd Gear 217 317 Torque Converter Operation Concerns No Apply 240 340 Always Applied/Stalls Vehicle 241 341 Cycling/Shudder/Chatter 242 342 Other Concerns No Engine Braking in 2nd Gear, Manual 2nd or Manual 1st Position 250 350 Gearshift Lever Efforts High 251 351 External Leaks 252 352 Vehicle Driveability Concerns 253 353 Noise/Vibration in Forward or Reverse 254 354 Engine Will Not Crank 255 355 No Park (P) Range 256 356 Overheating 257 357 a Carry out electrical routine first.
NOTE:
Not all concerns and conditions with electrical components will set a diagnostic trouble code (DTC). Be aware that the components listed may still be the cause. Verify correct function of these components prior to proceeding to the Hydraulic/Mechanical Routine listed.