Exhaust Manifold - RH: Notes

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Material

Item	Specification
Motorcraft Metal Surface Prep ZC-31-A	-
Threadlock 262 TA-26	WSK-M2G351-A6

Fig 1: Exploded View Of Exhaust Manifold With Torque Specifications - RH

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	N800419	RH exhaust Y-pipe flange nut (2 required)
2	W707753	RH exhaust Y-pipe flange stud (2 required)
3	W701706	RH exhaust manifold nut (8 required)
4	9430	RH exhaust manifold
5	9448	RH exhaust manifold gasket
6	707747	Exhaust manifold-to-cylinder head stud (8 required)

Fig 2: Engine Support Insulators & Fasteners With Torque Specifications

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	W710384	RH engine support insulator nut (2 required)
2	6P018	RH engine insulator nut washer
3	W711403	LH engine support insulator bolt
4	W710222	RH engine support insulator bracket bolt (3 required)
5	6038	RH engine support insulator
6	W710222	LH engine support insulator bracket bolt (3 required)
7	6038	LH engine support insulator

Fig 3: A/C Compressor Replacement Components With Torque Specifications

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	W520413	A/C compressor discharge fitting nut
2	W520413	A/C compressor suction fitting nut
3	12A581	Clutch field coil electrical connector
4	12A581	Crankshaft position (CKP) sensor electrical connector
5	N806184	A/C compressor bolt (3 required)
6	19703	A/C compressor
7	19B596	O-ring seal (2 required)
8	19B596	Gasket seal (2 required)