LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1805 (Engine - 4.6L (2V) - F-150) >> In-Vehicle Servicing >> Oil Pump Screen and Pickup Tube >> Removal

Oil Pump Screen and Pickup Tube: Removal

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. For additional information, refer to Oil Pan  in this article.
  2. Remove the 3 bolts and the oil pump screen and pickup tube.
    • Discard the O-ring seal.
    3. Fig 1: Locating Oil Pump Pickup Tube
    GF0002641Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals