Intake Manifold: Notes
WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Material
| Item | Specification |
|---|---|
| Silicone Gasket Remover ZC-30 |
- |
| Motorcraft Metal Surface Prep ZC-31 |
- |
| Item | Part Number | Description |
|---|---|---|
| 1 | 9D477 | Exhaust gas recirculation (EGR) system module tube |
| 2 | 9J274 | Fuel tube spring lock coupling |
| 3 | - | EGR system module electrical connector (part of 12B637) |
| 4 | - | Electronic throttle control electrical connector (part of 12B637) |
| 5 | - | Fuel rail pressure and temperature sensor vacuum connector (part of 9E498) |
| 6 | - | Fuel rail pressure and temperature sensor electrical connector (part of 12B637) |
| 7 | 6K817 | Positive crankcase ventilation (PCV) tube |
| Item | Part Number | Description |
|---|---|---|
| 8 | N806178 | Thermostat housing bolts (2 required) |
| 9 | 8594 | Thermostat housing |
| 10 | 8575 | Thermostat |
| 11 | N806156 | Intake manifold bolts (9 required) |
| 12 | 9S455 | Intake manifold |
| 13 | 9441 | LH intake manifold gasket |
| 14 | 9439 | RH intake manifold gasket |