LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1805 (Engine - 4.6L (2V) - F-150) >> In-Vehicle Servicing >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the engine front cover and the crankshaft front seal inner lip with clean engine oil.
    2. Fig 1: Locating Crankshaft Front Seal
    G03881970Courtesy of FORD MOTOR CO.
  2. Using the special tools, install a new crankshaft front seal.
    3. Fig 2: Installing Crankshaft Front Seal Using Special Tools
    G03919891Courtesy of FORD MOTOR CO.
  3. Install the crankshaft pulley. For additional information, refer to Crankshaft Pulley  in this article.
scientia non olet · About LEMON Manuals