General Specifications
WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Specifications | |
| Available drive pinion bearing adjustment shim in steps of 0.25 mm (0.010 in) | 0.254 mm (0.010 in) - 0.965 mm (0.038 in) |
| Backlash between ring gear and pinion teeth | 0.203-0.304 mm (0.008-0.012 in) |
| Differential case maximum runout | 0.076 mm (0.003 in) |
| Pinion bearing preload | 1.8-3.3 N.m (16-29 lb-in) |
| Ring gear maximum variation between teeth | 0.102 mm (0.004 in) |