LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1801 (Rear Drive Axle/Differential - Ford 10.25-Inch Ring Gear -- F150 & Mark LT) >> In-Vehicle Servicing >> Differential Housing Cover >> Removal

Differential Housing Cover: Removal

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Remove the differential housing cover.
    • Remove the 12 differential housing cover bolts, and drain the lubricant from the axle housing.
    • Remove the differential housing cover.
    3. Fig 1: Identifying Differential Housing Cover & Bolt
    GF0003130Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals