LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1797 (Rear Disc Brake System - F150 & Mark LT) >> Removal And Installation >> Rear Disc Brake >> Installation

Rear Disc Brake: Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean any rust or foreign material from the brake disc and wheel hub.
    • Use brake parts cleaner to clean the brake disc and hub surfaces.
    2. CAUTION: Do not allow the lubricant to make contact with the wheel studs, brake pads or brake disc.
  2. Apply a thin coat of lubricant to the hub flange.
  3. Install the brake disc on the wheel hub.
  4. Position the brake caliper assembly and install the 2 guide pin bolts.
    • Tighten to 30 Nm (22 lb-ft).
scientia non olet · About LEMON Manuals