Front Disc Brake - Four Wheel Drive (4WD): Removal
WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the 2 brake caliper anchor plate bolts and position the caliper and anchor plate assembly aside.
- Support the caliper and anchor plate assembly using mechanic's wire.
- Remove the front brake disc from the wheel hub.
CAUTION:
Do not allow the caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.