LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1795 (Noise, Vibration And Harshness - F-150 & Mark LT) >> Diagnostic Tests >> Noise, Vibration and Harshness (NVH) >> Component Tests >> Drive Pinion Stem and Pinion Flange

Drive Pinion Stem and Pinion Flange

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Check the pinion flange runout when all other checks have failed to show the cause of the vibration.

One cause of excessive pinion flange runout is incorrect installation of the axle drive pinion seal. Check to see if the spring on the seal lip has been dislodged.

scientia non olet · About LEMON Manuals