LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1791 (Engine Controls - Diagnostic Subroutines -- Diesel 6.0L (99P E-Series & 99P F450/550)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> P1536 - Parking Brake Switch Circuit

P1536 - Parking Brake Switch Circuit

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
P1536 - PARKING BRAKE SWITCH CIRCUIT

Description:  The parking brake applied switch provides an input signal to the powertrain control module (PCM) indicating the current status of the parking brake (applied or released). The parking brake signal circuit is pulled to ground with the application of the parking brake.
Possible Causes: 
  • Parking brake not applied and released during KOER self-test
  • Parking brake applied switch
  • Parking brake signal circuit short to ground
  • Parking brake signal circuit open
Diagnostic Aids:  Check for a loose connection, and damaged or corroded terminals.
Application    Key On Engine Off  Key On Engine Running  Continuous Memory 
All   refer to PINPOINT TEST I .
scientia non olet · About LEMON Manuals