LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1791 (Engine Controls - Diagnostic Subroutines -- Diesel 6.0L (99P E-Series & 99P F450/550)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> P0298 - Engine Oil OVERTEMPERATURE Condition

P0298 - Engine Oil OVERTEMPERATURE Condition

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
P0298 - ENGINE OIL OVERTEMPERATURE CONDITION

Description:  Indicates the engine oil temperature protection strategy in the powertrain control module (PCM) has been activated. This temporarily prohibits high engine speed operation by disabling injectors, reducing the risk of engine damage from high engine oil temperature. On engines which are equipped with an engine oil temperature (EOT) sensor, the PCM reads the oil temperature to determine if it is excessive. When an EOT sensor is not present, the PCM uses an oil algorithm to infer actual temperature. Engine shutdown strategy function is the same on vehicles with and without EOT sensors.
Possible Causes: 
  • Very high engine RPM for an extended period of time
  • Overheating condition
  • Damaged EOT sensor or circuit (vehicles with an EOT sensor)
Diagnostic Aids:  The engine is operating in high RPM range due to improper gear selection. This may cause a lack/loss of power or surge concern.
Application    Key On Engine Off  Key On Engine Running  Continuous Memory 
All   refer to PINPOINT TEST L .
scientia non olet · About LEMON Manuals