LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1791 (Engine Controls - Diagnostic Subroutines -- Diesel 6.0L (99P E-Series & 99P F450/550)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> P0108 - Manifold Absolute Pressure/BARO Sensor High

P0108 - Manifold Absolute Pressure/BARO Sensor High

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
P0108 - MANIFOLD ABSOLUTE PRESSURE/BARO SENSOR HIGH

Description:  Sensor operating voltage is greater than 5 volts (VREF). As a result it failed above the maximum allowable calibrated parameter.
Possible Causes: 
  • VREF shorted to VPWR
  • MAP signal shorted to VPWR
  • VREF should be less than 6.0 volts
  • Open circuit
  • Damaged MAP sensor
Diagnostic Aids:  VREF should be greater than 4.0 volts.
Application    Key On Engine Off  Key On Engine Running  Continuous Memory 
All   refer to PINPOINT TEST H .
scientia non olet · About LEMON Manuals