Fueling Corrections

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

The PCM adjusts the injector output based on the oil temperature information received from the EOT sensor and turbo boost information received from the manifold absolute pressure (MAP) sensor and the barometric pressure (BARO) sensor. These corrections are necessary to meet emissions requirements and to optimize power. The engine coolant temperature (ECT) and the EOT sensors are used as the primary input to the PCM to enable adaptive cooling. This provides a means of providing adequate cooling in severe engine temperature conditions. When the engine coolant temperature is greater than 105°C (221°F) or the engine operating temperature is greater than 123°C (253°F), the fueling rate of the engine is modified to provide cooling protection and prevent engine damage due to overheating. Outputs of these sensors can be monitored using a scan tool reading PIDs.