Electro-Hydraulic Injector Fuel Plunger
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
The electro-hydraulic injector fuel plunger is located in the injector and is driven by the amplifier piston. The fuel plunger injects fuel into the combustion chamber at pressures of up to 196,500 kPa (28,500 psi) through the nozzle assembly. Fuel is supplied to the injector at approximately 345 kPa (50 psi) through fuel rails in the cylinder heads.