Analyzing PCM Data: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Ford RV Cutaway, 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
Once the concern area is identified, the circuit must be checked to determine if the wiring or component is damaged. When making circuit and component measurements, make sure all accessories and dome and hood lamps are off. Use any of the following methods to diagnose a suspected PCM wire circuit or device. Some methods are particular to a certain type of PCM device.
- Change Condition to Cause Response by Input
- Change Input and Verify Output Response
- Click Testing/Output State Control (Solenoids/Relays)
- Coil Resistance (Solenoids/Relays)
- Harness Opens
- Harness Shorts