LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1784 (Engine Controls - Powertrain DTC Charts And Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> P1507 - Idle Air Control (IAC) UNDERSPEED Error

P1507 - Idle Air Control (IAC) UNDERSPEED Error

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2007 Mercury Mountaineer, 2007 Mercury Monterey, 2007 Mercury Montego, 2007 Mercury Milan, and 2007 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P1507 - IDLE AIR CONTROL (IAC) UNDERSPEED ERROR

Description:  This DTC is set when the powertrain control module (PCM) detects an engine idle speed that is less than the desired RPM.
Possible Causes: 
  • IAC circuit open
  • Air inlet is plugged
  • Damaged or incorrect IAC valve
  • IAC valve stuck closed
  • VPWR to IAC solenoid open
  • IAC circuit short to voltage
Diagnostic Aids:  Disconnect the IAC valve and look for little or no change in engine RPM as an indication of a stuck or damaged valve.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All refer to PINPOINT TEST KE .
scientia non olet · About LEMON Manuals