LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1784 (Engine Controls - Powertrain DTC Charts And Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> P0320 - Ignition/Distributor Engine Speed Input Circuit

P0320 - Ignition/Distributor Engine Speed Input Circuit

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2007 Mercury Mountaineer, 2007 Mercury Monterey, 2007 Mercury Montego, 2007 Mercury Milan, and 2007 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P0320 - IGNITION/DISTRIBUTOR ENGINE SPEED INPUT CIRCUIT

Description:  The ignition engine speed sensor input signal to powertrain control module (PCM) is continuously monitored. The test fails when the signal indicates that 2 successive erratic profile ignition pickup (PIP) pulses occurred.
Possible Causes: 
  • Loose wires/connectors
  • Arcing secondary ignition components (coil, wires and plugs)
  • On-board transmitter (2-way radio)
Diagnostic Aids:  The DTC indicates that 2 successive erratic PIP pulses occurred.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All - - refer to PINPOINT TEST NC .
scientia non olet · About LEMON Manuals