LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1784 (Engine Controls - Powertrain DTC Charts And Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> P0106 - Manifold Absolute Pressure (Map/BARO) Sensor Range/Performance

P0106 - Manifold Absolute Pressure (Map/BARO) Sensor Range/Performance

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2007 Mercury Mountaineer, 2007 Mercury Monterey, 2007 Mercury Montego, 2007 Mercury Milan, and 2007 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P0106 - MANIFOLD ABSOLUTE PRESSURE (MAP/BARO) SENSOR RANGE/PERFORMANCE

Description:  MAP sensor input to the powertrain control module (PCM) is monitored and is not within the calibrated value.
Possible Causes: 
  • Slow responding MAP sensor
  • Electrical circuit failure
  • Damaged MAP sensor
Diagnostic Aids:  VREF voltage should be between 4.0 and 6.0 volts. The PID reading is in frequency.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All refer to PINPOINT TEST DM .
scientia non olet · About LEMON Manuals