LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1784 (Engine Controls - Powertrain DTC Charts And Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> P0098 - Intake Air Temperature Sensor 2 Circuit High

P0098 - Intake Air Temperature Sensor 2 Circuit High

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2007 Mercury Mountaineer, 2007 Mercury Monterey, 2007 Mercury Montego, 2007 Mercury Milan, and 2007 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P0098 - INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT HIGH

Description:  Indicates the sensor signal is greater than the self-test maximum. The intake air temperature 2 (IAT2) sensor maximum is 4.6 volts.
Possible Causes: 
  • Open circuit in the harness
  • Sensor signal short to voltage
  • Incorrect harness connection
  • Damaged sensor
Diagnostic Aids:  Monitor the IAT2 PID value. A typical IAT2 temperature should be greater than the IAT1 temperature.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All refer to PINPOINT TEST DU .
scientia non olet · About LEMON Manuals