LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1779 (Safety Belt System) >> Diagnosis And Testing >> Safety Belt System >> Symptom Chart

Symptom Chart

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM CHART

Condition Possible Sources Action
  • The safety belt warning indicator lamp does not operate
  • Burned-out lamp/LED
  • Circuitry
  • Instrument cluster
  • Restraints control module (RCM)
  • The safety belt warning chime does not operate
  • Safety belt switch
  • Instrument cluster
  • RCM
  • Circuitry
  • Excessive pressure on the occupant during normal wear, the webbing cannot be extracted, excessive slack in webbing does not retract
  • Front safety belt retractor and tongue
  • Rear safety belt retractor and tongue
  • CARRY OUT the Component Test . INSTALL a new retractor if necessary.
  • The Belt-Minder® feature is inoperative
  • The Belt-Minder® feature is deactivated
  • Circuitry
  • REFER to WARNING DEVICES or the Seating and Safety Restraints in the Owner's Literature to activate the Belt-Minder® feature. If the Belt-Minder® is activated, REFER to WARNING DEVICES to diagnose.