Safety Belt Retractor and Pretensioner

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The safety belt retractor and pretensioner is a pyrotechnic device that removes excess webbing from the safety belt when deployed. The pretensioner works in conjunction with the front air bag system. When the front air bags deploy, the pretensioners deploy, causing the retractor to move downward, removing excess webbing from the lap and shoulder safety belts.

If the vehicle is involved in a collision that results in deployment of the front air bags and safety belt pretensioners, a new driver and passenger seat belt system (including safety belt buckle and pretensioners, safety belt retractors and height adjusters) must be installed.

For safety belt retractor pretensioner diagnostic information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .

For safety belt retractor pretensioner disposal information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .